Post by sizemic on May 10, 2011 22:54:05 GMT -5
--------------------------------------------
Everything you need to know about my PMMA and my manual PE can be found on my blog:
->sizemicblog.com <-
--------------------------------------------
Ok so I know I am new here but I am very very experienced when it comes to Natural PE. Here's a quick summary of my story:
• Found Thundersplace.org in 2005, lurked and practiced PE but didn't register there until 2008. (not as sizemic... but I don't really care to share my other name there as I dont go there anymore).
• I was originally 6" Erect non-bone pressed. x 4.5" erect girth
• I was originally 4" flaccid (NBP) x 4" flaccid girth.
• After 5+ years of natural PE (I did it all, stretching, hanging, clamping, jelqing, pumping, All day stretching... you name it, I did it) I am currently at:
• 7.25" Non-bone pressed Erect length x 4.5" girth
• 6" ~ 6.5" flaccid (non-bone pressed) x 4.25" flaccid girth.
• Yes... I am the definition of a "shower"!
• Found this site at the begining of May 2011.
• FINALLY I can get some permanent girth gains!
My PMMA Plan and questions / concerns: - I would love some feedback and comments!
1. Because I am such a shower... if I were to go through with PMMA and I achieve an erect girth of around 6.25" - 6.5" (My dream girth!!)... would that mean my flaccid girth will potentially be 6"+ as well?! considering where my flaccid vs erect girth is starting. I have the potential for a 6.5" - 7" long x 6" thick flaccid?!!
I am almost thinking this could be a negative... Imagine how hard it would be to hide it... I mean almost impossible wouldn't it be?
2. My ultimate plan would be to get my first round done as soon as possible (likely late May or early June if I can). Then get my second round done after 6 weeks and I will hopefully be around 6" girth... Hopefully. That way when I go back to university in the fall I should be ready and healed to pound some vag (hah).
3. Because I am 7.25" Erect (non-bone pressed) and around 7.5 - 7.75" Bone pressed erect... do you guys think I will need more than the standard 20cc of PMMA? Will Dr. C even consider that (even with my extra length)?
4. Concern: I am currently only 22 years old... the potential of messing up my penis is really worrying me. I mean I feel like I have a very asthetic looking penis right now... Will my asthetics be ruined really bad with PMMA?
5. Concern: I am also single currently (with 2 fuck buddies) ... and I hook up with quite a few young girls at uni every month. Would a 6.25" - 6.5" girth be too much? Like I mean... will I have instances where it just wont fit? Also... will it look like something is wrong with it? Will a stranger be able to tell something is just not natural here?
6. I will be documenting everything here and on my blog (because of instances where pics are removed here they will still be up there).
Please give feedback and help me through this process!! Thanks guys,
sizemic
Everything you need to know about my PMMA and my manual PE can be found on my blog:
->sizemicblog.com <-
--------------------------------------------
Ok so I know I am new here but I am very very experienced when it comes to Natural PE. Here's a quick summary of my story:
• Found Thundersplace.org in 2005, lurked and practiced PE but didn't register there until 2008. (not as sizemic... but I don't really care to share my other name there as I dont go there anymore).
• I was originally 6" Erect non-bone pressed. x 4.5" erect girth
• I was originally 4" flaccid (NBP) x 4" flaccid girth.
• After 5+ years of natural PE (I did it all, stretching, hanging, clamping, jelqing, pumping, All day stretching... you name it, I did it) I am currently at:
• 7.25" Non-bone pressed Erect length x 4.5" girth
• 6" ~ 6.5" flaccid (non-bone pressed) x 4.25" flaccid girth.
• Yes... I am the definition of a "shower"!
• Found this site at the begining of May 2011.
• FINALLY I can get some permanent girth gains!
My PMMA Plan and questions / concerns: - I would love some feedback and comments!
1. Because I am such a shower... if I were to go through with PMMA and I achieve an erect girth of around 6.25" - 6.5" (My dream girth!!)... would that mean my flaccid girth will potentially be 6"+ as well?! considering where my flaccid vs erect girth is starting. I have the potential for a 6.5" - 7" long x 6" thick flaccid?!!
I am almost thinking this could be a negative... Imagine how hard it would be to hide it... I mean almost impossible wouldn't it be?
2. My ultimate plan would be to get my first round done as soon as possible (likely late May or early June if I can). Then get my second round done after 6 weeks and I will hopefully be around 6" girth... Hopefully. That way when I go back to university in the fall I should be ready and healed to pound some vag (hah).
3. Because I am 7.25" Erect (non-bone pressed) and around 7.5 - 7.75" Bone pressed erect... do you guys think I will need more than the standard 20cc of PMMA? Will Dr. C even consider that (even with my extra length)?
4. Concern: I am currently only 22 years old... the potential of messing up my penis is really worrying me. I mean I feel like I have a very asthetic looking penis right now... Will my asthetics be ruined really bad with PMMA?
5. Concern: I am also single currently (with 2 fuck buddies) ... and I hook up with quite a few young girls at uni every month. Would a 6.25" - 6.5" girth be too much? Like I mean... will I have instances where it just wont fit? Also... will it look like something is wrong with it? Will a stranger be able to tell something is just not natural here?
6. I will be documenting everything here and on my blog (because of instances where pics are removed here they will still be up there).
Please give feedback and help me through this process!! Thanks guys,
sizemic