|
Post by envisionmore on Nov 23, 2010 1:42:34 GMT -5
Has anyone had or heard of Medical grade PMMA also called "New Plastic"? Or of a Doctor by the name of Dr Casavantes in Mexico? He seems like a very straight forward Doctor. I have emailed him 3 times and all 3 times I had a long response answering every question in detail within 24 hours. The PMMA is an injection for girth but also has the benefit of adding a little extra length. He says he and the Medical Lab in Brazil are working towards the FDA registration of the new PMMA, but will be a long process due to the patent (2014) that "Arteplast" has which is FDA approved already. This Casavantes guy is all over the web. He sent me a few before and afters that look impressive. This is a permanent procedure and the cost is very reasonable ($1500). If anyone has any info that would be great. Also has anyone heard back from Dr. Runels and his girth injection? Here's a couple of links for Dr Casavantes and the medical pmma www.drcasavantes.comwww.medicalpmma.comHe's also all over youtube.
|
|
|
Post by hoddle10 on Nov 23, 2010 10:31:45 GMT -5
Could you post the before and after photo's he sent you? I know a guy who had PMMA, but wasn't completely happy with it. I can't remember much about his experience, as this was going back a few years, but I do remember that whilst he wasn't totally happy, he did say the PMMA itself felt very good (he described it as feeling like a muscle) and he thought that with a bit more injected at the top of the shaft, it would work well. Basically I think he was saying it wasn't evenly distibuted. It sounds like FFT, in that you need a couple of injections to get an even contour. However, with FFT some people find they need to go back for regular top ups, whilst PMMA is permanent.
|
|
|
Post by envisionmore on Nov 23, 2010 11:12:19 GMT -5
Hopefully this works! Here's pic number 1
|
|
|
Post by envisionmore on Nov 23, 2010 11:29:10 GMT -5
Here's picture number two
|
|
|
Post by envisionmore on Nov 23, 2010 11:49:52 GMT -5
Here's picture number 3
|
|
|
Post by envisionmore on Nov 23, 2010 12:59:18 GMT -5
Picture 4
|
|
|
Post by envisionmore on Nov 23, 2010 13:05:43 GMT -5
Picture 5
|
|
|
Post by hoddle10 on Nov 23, 2010 13:13:46 GMT -5
They look pretty good, but it's hard to judge how it feels or what it would look like erect.
|
|
|
Post by Skeptical One on Nov 23, 2010 15:46:16 GMT -5
Envision, the pics are pretty good but I was under the impression that PMMA was not permanent, maybe the doctor could elaborate. Hoddle raises a good point too, fillers raise the question of how "real" they feel. And since its synthetic, rejection is also another risk, no?
As for Dr. Runels, he wrote back and should be getting me the Q&A material back my way soon. Keep posted!
|
|
stormy
Contributing Member
Posts: 52
|
Post by stormy on Nov 23, 2010 18:56:16 GMT -5
Envisionmore,
Would it be possible for you to list the questions you had asked him as well as his responses?
Thanks, stormy
|
|
|
Post by envisionmore on Nov 24, 2010 2:10:41 GMT -5
I received two new emails from his nurse today. They really seem to be genuinely nice caring people. Whom LOVE questions!
Here's a summary of the first and second emails I received.
Dr Casavantes has been working with fillers for two decades and PMMA for eight years. The penis will be larger and have increased sensitivity in the erect state and appear longer in the flaccid state. PMMA is permanent and surgical removal is the only removal method. Steroid injections can reduce and soften areas if needed. Side effects from the procedure will include bruising and swelling. You are able to resume normal activity as soon as you feel comfortable and the entry points at the pubis area have healed. PMMA has been used in the body for over fifty years without any pharmacological reactions with the human body.
The third email Q & A
1. In my research I read that Dr Casavantes receives his Medical PMMA "New Plastic" from a medical lab in Brazil and is up for FDA approval. Is this correct?
A. Dr Casavantes and his group are working towards the registration of PMMA with the FDA, but it will be a long process. To begin with, there is a PMMA based product already registered by the FDA (Arteplast) that has its patent until 2014. Of course, they cannot do anything before that time.
2. What is the difference between Silicone injections and PMMA "New Plastic"?
A. Please make very clear we DO NOT use silicone oil (also known as siloxane, polysiloxane, dimethylpolysiloxane) for any of our procedures. Besides its popularity and extensive use, silicone has never been approved as a soft tissue filler, and those breast implants filled with it, ended up as what some people call the "silicone holocaust". History of the use of the oil as a filler has been around for over 60 years!!! - We only use polymethtylmethacrylate ( also known as PMMA), that is comprised by micro-spheres of SOLID PLASTIC and suspended in a water based, absorbable vehicle. The fact that the first one is an oil and that the second one is a solid plastic makes a complete difference, besides other technical characteristics of the highly studied, controlled and approved PMMA.
3. What are the possible complications associated with PMMA?
A. The highest percentage of complications associated with PMMA are technique (poor training) related. The product is very safe, but has to be used by a highly qualified physician with a lot of experience.
4. Have you seen disfigured penises from using this product?
A. We have seen disfigured penises in patients that have had extensive amounts of the product. There must be a limit in the number of sessions, the concentration and the amount of product to create a safe procedure. Again the procedure needs to be performed by a highly qualified physician with a lot of experience.
5. How many sessions are needed?
A. As with all Bioplasty procedures, patients have to come back for a second session.
6. What is the amount injected at each session?
A. Sessions are usually done with 10 - 15 cc of 10% pmma.
7. What type of aftercare is needed?
A. Aftercare doesn't take much special care. Patients receive an easy to follow instruction sheet after the treatment. No need to stay in the area or have medical assistance. Most patients fly back to their cities either the same, or the next day.
8. What does the pmma feel like?
A. The implant is palpable. However, patients that received the correct dose (2 sessions, 10%, 10 - 15 cc) will get more acceptable results. No patient has ever complained about the implant being palpable, even though they sometimes notice it themselves.
9. Can I have the lengthening procedure or other procedures after having the PMMA?
A. PMMA is a permanent filler. The only way to extract it is by physically removing it through skin openings. However, it doesn't interfere with other procedures like surgical lengthening and such.
10. What are long term affects of pmma?
A. PMMA will not affect your health down the road, like silicone does.
Congratulations for your good work researching for this procedure. We definitely like educated patients that make a conscious decision after knowing the benefits and possible complications... I understand your concerns and the importance of this step in your life. My recommendation will be to continue your research from as many independent sources as you can find, in order to make the best decision for you. Best Regards
The fourth email Q & A
1. Is the cost of the second procedure included in the $1500 initial fee?
A. The cost for additional treatments is charged by the amount of the product used, and is typically one half of the first treatment. This is also dependent on what your expectations are for the second treatment.
15 cc is usually the maximum product used at any one session. The gains are like you see in the photos. In the flaccid state, the penis is unable to retract, creating longer length.
2. Can the Glans (head) be enlarged using pmma?
A. Temporary fillers such as Restylane can be used to augment the glans. The fifth email (they sent to me today)
Please feel free to contact me with any additional questions that you may have.
(Like I said they must like questions!)
Can you guys think of any questions I may have missed? They usually email back within a few hours. When I asked them what it feels like they replied it is palpable but they have never had a patient complain about this. The Doctor himself has injected his deltoids and I think his butt with pmma. He performs brazilian butt lifts, muscle enhancement, facial reconstruction, penis enlargements using PMMA "New Plastic". I wanted to ask if he has injected his own penis but I thought that might be a little personal (?).
|
|
|
Post by Skeptical One on Nov 24, 2010 3:25:57 GMT -5
envision, much thanks for obtaining this Q&A for us!!! very insightful and informative !!!
One question that comes to mind is: What is the average gain in girth among patients who have had 2 sessions (in inches or percentage)?
|
|
|
Post by Skeptical One on Nov 24, 2010 5:03:44 GMT -5
p.s. - i made a copy of envision's Q&A post for the RESOURCE ONLY forum (which also does link back to this thread for discussion).
thanks again envision !
|
|
|
Post by hoddle10 on Nov 24, 2010 7:02:34 GMT -5
I'd like to know how many times he's done this on the penis and how long he's been using PMMA in general. Also you could ask if he's had any patients who have had compications when he does this on the penis. When he did his first PMMA penis elnargement. Basically any questions that help us establish a bit more about his history with PMMA and PE.
|
|
|
Post by gsxr7501941 on Nov 30, 2010 1:10:34 GMT -5
There was a thread about this topic on the old MNS....had a link to a guy in South America who had it done, and was keeping a photo journal. Unsure where that went though, I couldnt find it when I did a google search. The results looked good, it was huge and seemed to be basically the same size flaccid as erect.
|
|